Signal Booster Drone 3000mW 2.4Ghz 35dBm WiFi SUNHANS eSunRC SHRC24G3WP

Description

Signal Booster Drone 3000mW 2.4Ghz 35dBm WiFi SUNHANS eSunRC SHRC24G3WP

Sunhans Drone WiFi Amplifier 2.4G Ultra Thin 46g Lightly Signal Booster for UAV RC compatible DJI, Yuneec, 3DR, XIRO, Parrot, JTT, Blade etc.

Features:  
Excitingly small! Only 46g!
5-16V wide voltage range;
2.4GHz, Max. 3000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install; light weight, small size, protable;
Designed for Drones, UAV, RC equipment….

Product Description:
The 2.4GHz WLAN signal booster is designed for IEEE 802.11b/g/n Wireless LAN Applications.

The product is compatible with time division duplexing (TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification.

The signal booster can work with most WLAN/Wi-Fi device and increase the WLAN signal strength, therefore a larger WLAN coverage and more stable transmission rate.

SHRC24G3WP 2.4ghz 3w 35dBm is specially designed for  UAV, drones, compatible perfectly with DJI, Yuneec, 3DR, XIRO, Parrot, JTT and Blade, also auitable for active speaker, router and so on.

Features:
Easy Installation.
Plug and play, no software setup.
3.5dB ultra-low noise. High Gain, High Value, High Performance.
Aluminum-alloy case by CNC, it can expand wifi signal range 10-20 times.
Can enlarge WiFi signal coverage range, as long as the frequency of the product can be applied.
Widely used in security, drones, urban hotspot coverage, railway hotspot coverage, etc.

SKU: 0305SH100317
Model: SHRC24G3WP
P/N: RC24G3W015
Barcode: 6958917601589
Features:
Excitingly small! Only 46g!
5-16V wide voltage range;
2.4GHz, Max. 3000mW output power;
Aluminum-alloy case by CNC, anti-interference;
Full kit, easy to install;
Designed for Drones, UAV, RC equipment….
Technical Specifications:
Booster Model: SH-RC24G3W
Operating Range:2.4~2.5 GHz
Operating Mode:Bi-directional, half-duplex, time division duplex senses RF,
carrier from transmitter and automatically switch receiving
to transmitting mode.
Connector Type:SMA Receptacle 50ohm,To radio SMA female(hole inside),To antenna RP-SMA
female(pin inside)
Input Power:0~20 dBm
Transmit Gain:15-18dB
Output Power:3000mW (35dBm)
Receiver Gain:≤ 12 dB
Noise Figure:≤3.5 dB typical
Frequency Response:±1dB over operating range
Supported voltages: 5V~16V/2A DC
Operating Temperature:-20°C to + 70°C
Operating Humidity:Up to 75% relative humidity
Material:Cast Aluminum
Booster Weight:46g
Booster Size:7.3 x 3.8 x 1cm
Package Weight: 180g
Package Size:12 x 11 x 6.5cm
Package contents
 SH-RC24G3W eSunRc WiFi booster
 RG141 20cm cable SMA male to RP-SMA male
 DC 2.5” to 12V 5.5” adapter
 DC 2.5” to USB adapter
 DC 2.5” to JST adapter
 Mounting Velcro
 User Manual